400T/H D&G asphalt plant erected in CEEC job site

PMA105 asphalt plant is running in Bangladesh

The project will raise the average speed of traffic, reduce the time of trips, and link the parts of the city to each other

The Jiaozhou Bay Bridge, 36.48-km-long roadway bridge in Qingdao, has been named the best bridge in the world by Forbes. Asphalt mixing plant from D&G Machinery is honored to participate in the pavement construction of the best bridge

DG asphalt plant, it has taken more than 30 years to build up its unique industrial experience to manufacture elegant asphalt mixing plant.

Targeted road loan for Uzbekistan

Bauma China 2020 is going ahead

Unlocking the "new form" of DGX

Current situation of domestic asphalt pavement
The only integrated hot recycling asphalt plant in China

The epidemic prevention and control blocked the pace of our construction, while possessing an asphalt plant with a "smart brain" allows you to understand the overall data of the device at home. Making good use of D&G latest DGLeap system, let data transmission be accurate, let device management be easy.

In 2020, the COVID-19 pandemic hit the world. The worldwide travel restrictions has made on-site installations and technical services become a challenge. How to ensure the smooth installation of D&G customers' plant? PM took the lead in using modern network to remotely assist customers to solve the installation and debugging work.

PM popularity gained by good reputation after launching, per below is an introduction for the four equipment.

Nowadays our Chinese strength, made in China, and China construction have turned the straits to thoroughfare, which making convenient for people to go home and travel more smoothly. PM as one of the enterprises participates in the national construction is striving to build a better, more beautiful and prosperous China with its pure heart!

From 2005 to 2018, PM has installed more than 600 sets asphalt plants around the world. However, few achievements in Shanxi (Northeast province in China) due to low-end market demands. The demands are improving with times go by. In 2018, PM successfully installed a DGE3000D eco-friendly asphalt mixing plant in Shanxi province. Since then, the story is started. This equipment has produced more than 100,000 tons’ hot mixture till 2020 without any accidents.

At the beginning of 2020, PM successfully sold two DG3000D asphalt mixing plants to GR INFRASTRUCTION (a premium road construction enterprise in India).

the basic knowledge that asphalt can be used as an engineering material has been around since 6000 B.C. Its earliest uses were in the shipbuilding industry by the Sumerians. The word “asphalt” itself is believed to be derived from the Akkadian term “asphaltic.” The earliest forms of asphalt were naturally occurring.

We are constantly upgrading our technology and products in a systematic way to produce high quality Asphalt Plants. Asphalt Drum Mix Plants Manufacturers, Asphalt hot mix plant, asphalt road equipment.

PM DG4000 asphalt mixing plant has settled in Islamabad, the beautiful capital of Pakistan since it first came onto the market

In early September 2020, Northwest Civil Aviation Airport Construction Company started a foundation-laying ceremony which held for Phase III Project, Xinzheng International Airport, Zhengzhou city. PM has successfully won the trust of customer with our high standard equipment as an enterprise specialized in manufacturing and selling of asphalt mixing plants which be used in bituminous pavement.

Hot mix asphalt (HMA) paving materials are a mixture of size-graded, high quality aggregate (which can include reclaimed asphalt pavement [RAP]), and liquid asphalt cement, which is heated and mixed in measured quantities to produce HMA.

The National Asphalt Pavement Association (NAPA), founded in 1955, represents more than 1,100 asphalt producers, paving contractors, and affiliated businesses that build the network of roads so critical to the American economy.

D&G Technology attains "EcoChallenger" award for five consecutive years

According to the latest industry survey,the asphlt industry reclaimed 97 million tons of RAP for future use, saving about 58.9 million cubic yards.

PM managed successfully to set up our first asphalt plant in Bahrain in 2020.

Cold asphalt recycling can be done as a plant mix using RAP or in-situ by milling and adding a rejuvenating/stabilising agent. It is generally applicable to roads with low to moderate traffic volumes.

PM was honored the 3+ Year Award of Industry Cares 2020

The single most important factor affecting the production rate of a particular size of continuous drum plant is the moisture content of the aggregate entering the dryer drum.

The end product of asphalt hot mix plants is the hot mix asphalt which is produced by the various combinations of electrical and mechanical components.

An PM Monoblock Recycled Asphalt Mixing Plant is builded to create new infrastructure for a road construction in Yongkang City, Zhejiang Province. It is the first plant, which ending the history that without asphalt plant in this city.

In Sweden, a total of about 1 million tonnes of old pavement material is recycled each year.

Subsequent studies by various regulatory agencies have verified that emissions from asphalt pavement mixing facilities do not present an environmental or public health hazard.

Asphalt Batch Mixing plant: This plant produces HMA in batches in every 40-50seconds. The cold aggregates are fed into the feeders. These are then shifted to the dryer drum by means of a conveyor belt. The dryer drum takes away the moisture in the aggregates and heats it by passing the aggregates from one end to the other through drum rotation.

The asphalt paving industry is the industry segment that builds the world’s asphalt motorways, highways, streets, airport runways, parking areas, driveways, footpaths and cycle paths, and sport and play areas.

As long as there are construction activities going on in the world, there will be a constant demand for concrete.

From July 1th to 5th 2020,PM'after-sales team started their serving journey of asphalt batch mixing plants in East China. In this service trip we visited 6 construction sites with 7 sets asphalt plant.

The maintenance of asphalt mixing plant is an important link to ensure the normal operation of the equipment.Asphalt mixing plant maintenance works helps to the reduction of the failure rate and the extension of the service life.

On 23 Nov, D&G Machinery was honored to attend T50 Summit of World Construction Machinery Industry 2020 in Shanghai. More than 800 people attended in this summit, including equipment manufacturers, agents, engineering companies and other users.

Asphalt road surfaces offer many benefits, including cost efficiency, reduction in noise pollution and comfort. Using asphalt materials in road construction and maintenance can improve the benefits for all road users and the environment.

With the rapid development of China's high-grade highway construction, the market of asphalt mixing equipment also risen accordingly. Asphalt concrete mixing equipment is the key equipment of asphalt pavement mechanization construction, the quality and speed of construction are directly affected by its operation, has always been valued by highway construction units.

An asphalt mixing plant retrofit from PM can get your company’s recycling efforts started – or add a significant boost to those already underway.The use of recycled asphalt (RAP) has become a necessity.