Search This Supplers Products:Development and production of asphalt mixing plantResearch and development and production of road and bridge construction maintenance equipmentDevelopment and production of recycling asphalt mixing plantConstruction waste treatment and resource utilization equipment and related spare partsInstallation and debugging of asphalt mixing plantChina LB asphalt mixing plant for road construction DG
How to calibrate the Mettler weighing terminal IND320？
Standard Calibration
Standard Calibration uses two points,zero and span point.Steps are as follows:
[System Setup]→[Scale Setup]→[Set Capacity].Set the scale capacity in this item.
[System Setup]→[Scale Setup]→[Set Capacity].Set the increment in this item.
[System Setup]→[Scale Setup]→[Select Units].Select the scale unit in this item.
1.Adjust Zero
Step 1:Access to the zero capture menu, [System Setup]→[Scale Setup]→[Adjust Zero].
Step 2:Press Enter key, the IND320 displays “Adjust Zero?”.Press Select key to choose “√”，and then press Enter key to perform zero adjust.
Step 3:The IND320 displays “Empty?” to inform the users to empty the scale.
Step 4:Press Enter key,the IND320 performs zero capture.The IND320 displays “Adjust Zero 20%”.The guage ‘20%’, ‘40%’...... ‘100’ indicates the status of the adjustment.
2.Adjust Span
Step 1:Access the span capture menu, [System Setup]→[Scale Setup]→[Adjust Span]
Step 2: Press Enter key, the IND320 displays “Adjust Span”.Press Select key to choose “√”，and then press Enter key to perform span adjust.
Step 3:Press Enter key,when the IND320 displays “Load Weigh”.Input the load weight in “Input Weigh 000000”,and press Enter key to perform span capture.
1.Adjust Zero
Step 1:Access to the zero capture menu, [System Setup]→[Scale Setup]→[Adjust Zero].
Step 2:Press Enter key, the IND320 displays “Adjust Zero?”.Press Select key to choose “√”，and then press Enter key to perform zero adjust.
Step 3:The IND320 displays “Empty?” to inform the users to empty the scale.
Step 4:Press Enter key,the IND320 performs zero capture.The IND320 displays “Adjust Zero 20%”.The guage ‘20%’, ‘40%’...... ‘100’ indicates the status of the adjustment.
2.Adjust Span
Step 1:Access the span capture menu, [System Setup]→[Scale Setup]→[Adjust Span]
Step 2: Press Enter key, the IND320 displays “Adjust Span”.Press Select key to choose “√”，and then press Enter key to perform span adjust.
Step 3:Press Enter key,when the IND320 displays “Load Weigh”.Input the load weight in “Input Weigh 000000”,and press Enter key to perform span capture.
1.Adjust Zero
Step 1:Access to the zero capture menu, [System Setup]→[Scale Setup]→[Adjust Zero].
Step 2:Press Enter key, the IND320 displays “Adjust Zero?”.Press Select key to choose “√”，and then press Enter key to perform zero adjust.
Step 3:The IND320 displays “Empty?” to inform the users to empty the scale.
Step 4:Press Enter key,the IND320 performs zero capture.The IND320 displays “Adjust Zero 20%”.The guage ‘20%’, ‘40%’...... ‘100’ indicates the status of the adjustment.
2.Adjust Span
Step 1:Access the span capture menu, [System Setup]→[Scale Setup]→[Adjust Span]
Step 2: Press Enter key, the IND320 displays “Adjust Span”.Press Select key to choose “√”，and then press Enter key to perform span adjust.
Step 3:Press Enter key,when the IND320 displays “Load Weigh”.Input the load weight in “Input Weigh 000000”,and press Enter key to perform span capture.
